Are you a car enthusiast looking to upgrade the performance of your BMW car? As you seek a BMW tuner for your engine, look at options that add power and efficiency. By making these factors a priority, your car will gain the best performance and make your investment worthwhile.
As they say at CarBahn Autoworks, “With the right tuning options, your car will perform at a top level.” When you obtain the best performance parts, you can customize your car to meet your exact desires.
Read Also: Different Types of Tire Tread Patterns
Today, we’ll discuss a few ways engine tuning works as well as how it benefits you.
BMW Tuners Helps You Adjust Your Air/Fuel Ratio (AFR) To Maximize Performance
For an engine to provide you with power, it needs three things:
- Air
- Fuel
- Spark
As you begin to add aftermarket parts, you may need to modify the AFR. When the air-fuel mixture burns during combustion, it becomes the stoichiometric ratio. When there’s too much fuel, the mixture becomes rich. If there’s not enough fuel then it becomes lean.
If your engine burns too lean or rich, you can use an engine tuner to make the necessary adjustments. A slightly rich AFR usually provides your car with the best power and helps maximize its performance.
BMW Tuners Helps You Raise The Governor Speed Limit
Manufacturers typically use governors to limit the top speed of your car for safety reasons. With a flash tuner, you can modify its max speed. Going over the speed limit is illegal, so car tuning serves more for racing events than daily driving.
Governors can also be used to help prevent engine breakdowns while on the road. If your car has a safe rev limit, you can use a BMW tuner to adjust it.
Your car can also benefit if it comes with upgraded shafts that improve airflow at high RPMs. Tuning options like these can provide you with the flexibility you need to meet your unique speed demands.
BMW Tuners Help You Adjust The Ignition Timing
Adjusting the spark or ignition timing is also a pivotal aspect of engine tuning. The ECU controls ignition timing in most modern engines since it decides when spark plugs fire as compression strokes end.
Here is a list of factors that help determine the timing of ignitions:
- Air/Fuel Ratio
- Engine temperature
- Fuel type
- RPM
As you add mods or swap cylinder heads, engine conditions change. Changing the spark timing can give you more horsepower and improve your car’s performance. Advancing the spark timing means that you spark earlier than usual while a delay timing sparks later.
It’s essential to be cautious of not firing the spark too early as it can lead to engine knock. Also, firing the spark too late can cause power loss and engine failure. With the proper measures, spark timing tuning can provide you with power gains.
To tune the spark timing, you’ll want to connect to a dynamometer. With this tool, you’ll know how much power you’re churning out. It also helps you figure out what effect your spark timing changes have on your car’s horsepower. These proactive measures can help you develop strategies that provide your BMW with the power it needs.
BMW Tuners Help Boost The Launch Control Of Your Car
Tuning your car doesn’t always have to be about adding power. With automatic cars, you already have launch control modes that boost buildup even when it’s idle. As for launching a car with a manual gearbox, turbo boosts will take time to build up.
The best way to address this issue is with launch control tuning methods. These tuners help preset your engine RPM at a specific speed while your car is stationary. Once the launch control tuning process is complete, you can finally eliminate the turbo lag issues.
To activate the tuned launch control, you would hit the clutch and throttle at once. The revs only go up to the level preset during launch control tuning. With this tuning process, you’ll gain the ideal boost you’ve been seeking without having to waste time and effort.
Once you release the clutch, you’ll get to enjoy the lightning-fast acceleration, even in a car with a manual gearbox. Not only that, but you’ll get to unlock the full potential of your BMW car.
Choose A BMW Tuner That Brings You The Best Power And Efficiency
As you seek a BMW tuner for your car, look to make strength and output a priority. Like CarBahn Autoworks recommends, “Seek upgrades that help make your car efficient and powerful.” With top-quality upgrades, your car will be able to perform at the highest level.
